| REGISTERED DATE: |
2007/11/26 |
 |
| CATEGORY: |
A-LOG/VTAM |
|
| CONDITION: |
When A-LOG/VTAM (MODE=MULTI) is used on MSP and T380B145 is applied. |
|
| PROBLEM DESCRIPTION: |
When conditions are met, ALGLVTAM abnormally terminates with S0C1 at STIMER exit whose address is incorrectly set by T380B145. |
|
| TEMPORARY ACTION: |
None |
|
| PROBLEM CONCLUSION: |
The program is corrected to set correct STIMER exit address. |
|
| PREREQUISITE PTF: |
T380B145 |
|
| PROGRAM: |
ALGLVTAM |
|
| CATALOGED PROCEDURE: |
ALGLVTAM |
|
| NECESSARY ACTION: |
After stopping A-LOG Monitor, apply T380B147. Restart A-LOG Monitor. |
|
| AMENDING PTF: |
None |
|
