A-LOG Customer Support - Information on updates

A-LOG Customer Support - Information on updates

A list of available PTFs for A-LOG is provided. Click on a link below to access the information for a specific PTF.
If you have any comments or requests, please contact us via email.

PTF No.	PROBLEM SUMMARY
T380B165	If a dump dataset is mistakenly created on DASD, it may be deleted after cancelling WTRJUTL or WTRSUTL. New!!
T380B164	In a local side of MODE=MULTI, when a terminal function, ALOGJLOG, or ALOGSLOG abnormally ends, a User Queue for the job retains.
T380B163	When a severe problem occurs in Management Database, the last updated data will be backed out.
T380B162	When 'PRINT' command is entered on Screen 2.1 of Terminal function, SSB003W message will be displayed.
T380B161	When 'MENU' command is entered on Terminal function, S0C4 abnormal end may occur.
T380B160	Incorrect SEQ number is printed on the proof list of ALOGJDMP.
T380B159	After ALOGJRST or ALOGLRST gets errors, RSP26, 27, or 28 may occur for ALOGJLOG or Terminal function.
T380B158	With MODE=MULTI, Cancel command must be issued twice to cancel ALOGJLOG or ALOGSLOG.
T380B157	SCT239E and SCT219E messages are displayed repeatedly by ALOGJLOG.
T380B156	SDB310E message is displayed when I/O error occurred for Datapool.
T380B155	ALGGVTAM does not stop even when Stop command is issued.
T380B154	Garbage data remains in Datapool after an index is deleted.
T380B153	Expanding PTF area.
T380B152	Calculation of the space utilization of Datapool is incorrect.
T380B151	Cluster size displayed in the message in response to DSPACE command is incorrect. (Recreation of T380B143)

PTF No.	PROBLEM SUMMARY
T380B150	A-LOG Monitor hangs up after S602 abnormal end occurs.
T380B149	Error message is incorrect when Datapool access error occurs on Terminal function.
T380B148	When ALOGDMP2 utility gets RSP 810 while deleting dumped job log data, it stops processing.
T380B147	ALGLVTAM abnormally terminates with S0C1.
T380B146	ALOGJLGE stores SYSOUT datasets not in order of STEPs.
T380B145	ALOGJLOG does not stop although Stop command is issued.
T380B144	Management Database becomes full although space utilization in the output report of ALOGREP utility is not 100 %.
T380B143	Cluster size displayed in the message in response to DSPACE command is incorrect.
T380B142	Management Database becomes full although space utilization in SPM107I message is not 100 %.
T380B141	Resource 'DCDUSER' is logged twice into Security Log file.
T380B140	ALOGJLOG does not stop although Stop command is issued.
T380B139	WTODESC in ASPPRM1 is not effective.
T380B138	Programs get RSP 026 or 027 while accessing Management.
T380B137	SEQ parameter of PRINT statement is not effective.
T380B136	ALOGJLOG stores SYSOUT datasets not in order of STEPs.
T380B135	Additional PTF of T380B132.
T380B134	Additional PTF of T380B133.
T380B133	ALOGJLOG purges a job log even if it fails to store the job log into A-LOG Database.
T380B132	(New function) A-QUALITY interface is required.
T380B131	SENSE bytes of SCT220E and SCT247E messages are incorrect.

PTF No.	PROBLEM SUMMARY
T380B130	ALOGUBKS stops processing when it encounters inconsistent data in SCT file.
T380B129	A-LOG Monitor falls into a loop.
T380B128	KEEP and/or RETN parameters are ignored by ALOGJDMP and ALOGLDMP.
T380B127	Not available
T380B126	Not available
T380B125	The progress is unknown while executing ALOGUBKS or ALOGLBKS.
T380B124	ALGGVTAM does not stop even when Stop command is issued.
T380B123	ALOGRENO utility ends unintentionally at the middle of the steps.
T380B122	The number of processed job logs or SYSLOGs shown on ALOGUBKS report does not match the number shown on ALOGLBKS report.
T380B121	SYSLOG data is not displayed correctly.
T380B120	A-LOG Monitor abnormally ends with U0034 after displaying 'SIO006E PGM=ABSVIOSM SID COUNT OVER=100' message.
T380B119	WTRJUTL and Restore utility cannot process a job log dumped by ALOGJDMP utility.
T380B118	SYSLOG data in Japanese is not displayed correctly.
T380B117	The number of blocks formatted by DUMFORM0 utility is less than the number specified in the SYSIN control statement.
T380B116	DMM record is not created by ALOGDMP2 utility.
T380B115	A-LOG Monitor may abnormally end with S001-1 while accessing SCT file.
T380B114	ALOGJLOG may abnormally end with S0C7 while storing a job log transferred from other OS.
T380B113	ALOGLBKS may display SDB321E message and abnormally end with S0C9 while loading Datapool.
T380B112	Expanding PTF area.
T380B111	Non-deleted SYSLOG information is listed on Job Log Index Deletion Proof List of ALOGDMP3.